uvirled
uvirled"
uvirled"
Are there any alternative materials to AlGaN for 254 nm UVC LEDs to improve lifespan?

Are there any alternative materials to AlGaN for 254 nm UVC LEDs to improve lifespan?

  • Saturday, 13 December 2025
  • 0
  • 417
  • 0

Are there any alternative materials to AlGaN for 254 nm UVC LEDs to improve lifespan?Yes, there are several alternative material systems and innovative material technologies that can replace AlGaN for 254 nm UVC LEDs and have the potential to improve their lifespan. These materials address the shortcomings of AlGaN, such as poor electrical performance and difficult light extraction when used for short-wavelength UVC emission. Here are the key alternatives:
  1. SPSL nanostructure material
    Developed by Silanna UV through its patented Short - Period Superlattice (SPSL) technology, this material is a nanostructure composed of alternating layers of AlN and GaN. Unlike the traditional AlGaN alloy which adjusts the proportion of aluminum and gallium to adjust the band gap, SPSL can finely tune core properties like band gap and conductivity by modifying the thickness of its constituent layers. This effectively solves the problems of poor light extraction and inferior electrical performance that plague high - aluminum - content AlGaN in short - wavelength LED applications. The 255 nm deep - UV LED products based on this material have been put into production, and they feature low power consumption and excellent lifespan performance, making them highly suitable as an alternative material for 254 nm UVC LEDs.
  2. Boron Nitride (BN)
    As an ultra - wide bandgap semiconductor material, boron nitride has a band gap of approximately 6 eV, and theoretically, it can cover the 200 - 300 nm deep - UV band. The homogeneous junction deep - UV light - emitting chip developed based on boron nitride can emit deep - UV light with a wavelength ranging from 261 nm to 300 nm, which is very close to the 254 nm band. Compared with AlGaN - based LEDs, the homogeneous junction structure of boron nitride chips resolves issues such as a large number of interface defects and low carrier recombination efficiency in traditional heterogeneous junction devices. Moreover, its ultra - wide bandgap enables it to operate stably in high - temperature and high - radiation environments, and it is expected to significantly enhance the lifespan of UVC LEDs that are prone to performance degradation due to temperature stress.
  3. BAlGaN Alloy
    This is a new alloy material formed by incorporating boron into the AlGaN system. A major issue with AlGaN - based LEDs is the lattice mismatch between AlGaN and AlN substrates, which leads to high threading dislocation density and impairs the efficiency and lifespan of the devices. BAlGaN can achieve near - lattice matching with AlN substrates while maintaining a band gap comparable to that of AlGaN with the same gallium content. Additionally, when the gallium content reaches 45% or higher, BAlGaN emits transversely polarized light. These characteristics help reduce crystal defects in the device, mitigate the efficiency loss caused by lattice mismatch, and thereby lay a solid foundation for manufacturing high - efficiency and long - lifespan 254 nm UVC LEDs.

0users like this.

Leave a Reply

Blog Tag
RSS

Get in touch

Refresh Code